Pet Preform mould



SINO-PK is the most famous PET preform mould manufacturers, more than ten years professional PET preform mold supplier in China.


SINO-PK is the most famous plastic PP, PE cap,closure mould manufacturer, has strong design ability and tooling technology.

 
SINO-PK
offer PET ,PE blowing bottle mould,PET ,PE blowing bottle mold,PET ,PE blowing bottle mould manufactures in China.

SINO-PK NEWS

PET preform mould manufacturer---World Famous PET preform molding expert---SINOPK

Date:2013-07-06

 

This artical is forcus on how to choose suitable machine for PET preform mould.
When customer decide to but new PET preform mould and  injection molding machine  , they have no idea which type injection machine is suitable for their PET preform mould.

At the beginning, customer should decide thePET preform mold cavity number and tell machine supplier PET preform neck size and weight. The machine supplier will pay attention to below points:

a) the mould could be put in the machine or not
b) the clamping force is strong or not
c) the injection weight is enough or not
 

Other doubts on how to choose suitable machine for PET preform mould, please contact me.

Date:2013-07-06

 

This artical is forcus on how to choose suitable machine for PET preform mould.
When customer decide to but new PET preform mould and  injection molding machine  , they have no idea which type injection machine is suitable for their PET preform mould.

At the beginning, customer should decide thePET preform mold cavity number and tell machine supplier PET preform neck size and weight. The machine supplier will pay attention to below points:

a) the mould could be put in the machine or not
b) the clamping force is strong or not
c) the injection weight is enough or not
 

Other doubts on how to choose suitable machine for PET preform mould, please contact me.

Date:2013-07-06

 

PET preform mould gate system isvery important for PET perform mould. SINO PK is a professional mould maker in China, can offer our customer not only mould, but a fine solution.
 

PET preform mould sprue gate can be divided into long gate, short gate, and needle valve gate.When it comes to gate, we will think of the valve gate hot runner, the advantage of valve gate is as follow:
 

1. Surface sprueless traces for fine surface processing

2. Built-in valve needle, valve needle is control by pneumatic or hydraulic

3. Timing control, the switch can be controlled

4. Sealing performance, smooth surface and high speed.

With more than ten years experience in mold manufacturing, our company adopts with needle valve gate for PET preform mould.

If you are interested in our mould, please feel free to contact me.

Date:2013-07-06

 

This artical is forcus on the introduction for medical vial mould from SINO package mould company. SINO PK could offer you high quality medical vial mould.

Medical vial mould, it is used to contain some medicines.This kind of medical vial structure is vert simple so useually we will make multi cavity medical vial mould.
The multi caivity medical vial mould cavity number is according to the machine tonnage in customer's factory, we could design the most economical cavity number by considering customer's machine.

The max. cavity number we made before is 24 cavities, mould steel is Stavax S136, hardness HRC45-52, stainless steel. Ejection system is using stripper ejection, cyle time is 10s-12s.

If you are interested in medical products moulds, please feel free to contac me.

 

Date:2013-07-06

 

N-flip top cap mould maker and exporter produce N-flip top cap mould in different ejection ways or use different steels, which will influence the life of a mould.

N-flip top cap mould feature:

Mould name: N-flip top cap mould
Mould cav: 8 cavities
Runner system: 8 points ANOLE hot runner
Mould size: 549*400*530mm
Cycle time: 20 s/stroke
Ejection: ejector and threaed demould
Mould life: 10M
Mould material: mould core:S420

SINO PACKING Co.,Ltd is specialized in many kinds of cap mould. We produce not only oil cap mould, but also flip top cap, 5 gallon cap and so on.
                                   
If you have a problem, please do not hesitate to contact me.


Posted by Snow

Email: export3@cnmould.cn   export9@dakumar.cn
Skype:sinogroupe-71

 

 

Date:2013-07-06

 

How to improve the quality of PET perform transparency is one of the most important factors ,so my opinion is as follows:

1. Chose professional PET injection molding machine is half the battle.

2. Choose high transparency plastic material.

3. Improve appropriately the injection temperature

Our products are exported to America ,Southeast Asia ,the Middle East ,West Asia ,Africa and other countries .With the strong technical force and advanced equipment, Sino PK is your best choice .

Date:2013-07-06

 

Our company is good at making different kinds of PET preform mould, wide neck PET preform mould.

Usually wide neck PET preform mould is used to blow some candy bowl, snacks container. Wide neck PET preform mould is similar to nomal water PET preform mould. Our company could make 4 cavities, 6 cavities, 8 cavities, or more cavities according to customer requiement.

The steel we use for wide neck PET preform mould is S136 from Stavax, hardness is HRC45-52 after heat treatment. The reason we choos S136 is its steel propoty is very stable, high hardness and very well polishing effect.

If you have any questions or requiremeta bout wide neck PET preform mold or other PET preform mould, welcome send e-mail to me. Our technical people will help you.

Date:2013-07-06

 

Our company enjoying high reputation in plastic molding area, we have the ability to offer customer different kinds of plastic mould, injection molding machine and bottle blowing machine.

SINO-PK is good at making multi cavity cap mould, PET preform mouldand bottle blow mould. We also could provide service for mineral water bottle molding line.

Below link is the 1500ml bottle mould blow machine running video, both PET preform mould, bottle mould and blowing machine are all offered from our company.
http://www.youtube.com/watch?v=QpAA0MzSi80&feature=youtu.be

Date:2013-07-06

 

Lubrication bottle is widely used in worldwide countries, especially in Middle East thus oil-rich countries. Before they buy lubrication bottle from some plastic supplier, but with the demand increasing, they plan to set up a line to produce lubrication bottle by themself.

Our company has two factories, one is mould factory which could manufacture various kinds of plastic mould, lubrication bottle is very easy for us.
So if you need similar mould, please send us e-mail.

Jessie
sinogroup01@gmail.com




high preformance extrusion blow molding machine,offer extrusion blow molding machine,oil container extrusion blow machine,famous extrusion molding machine

Date:2013-07-06

 

5 gallon 24 cavities cap mold

SINO-PK has very rich experiences in making multi cavity 5 gallon cap mould, we could make 8 cavities 5 gallon cap mould, 16 cavities 5 gallon cap mould, 24 cavities 5gallon cap mould, 32 cavities 5 gallon cap mould etc.

5 gallon cap material: LDPE
Mould core and cavity  steel: S136 from Stavax Hardness: HRC45-52
Mould life: 1M shots
Mould spare parts:SINO standard mould base
Mould base: Measure up to D-M-E metric standard or SINO standard
Cycle time: 18s+/-2s
Hot runner system: 24 tips pin point gate from ANOLE brand

Date:2013-07-06

 

General speaking, so far there are two ways to make theftproof cap.

One is through cap mould which have temper evident insert to modling the evident ring.This way means after injection process, the cap could be assembled with bottle directly.

Another way is using cap slitting machine to slit the cap temper evident ring. We will communicate with cap slitting machine company about the cap temper evident ring we need.

And they will custom the knife to slit the cap. In this way, we should provide caps to slitting machine supplier before they make the machine.

The cap mould with temper evident ring is complex than without temper evident ring cap mould.

But this kind of cap is without second tooling. Anyway, each way has its advantage and disadvantage, if you need more information, please contact us. For more information you can follow us in FACEBOOK.

Date:2013-04-03

SINO PACKAGE MOULD CO.,LTD is specialized in manufacturing many kinds of cap mould. We produce not only oil cap mould, but also flip top cap, gallon cap and so on.
Oil cap mould makers in China usually make the oil cap mould in different oil cap mould types according to the mould size , cavities, and cycle time.

Oil cap mould feature:
Mould name: Oil cap mould
Mould cav: 24 cavities
Runner system: 24 points ANOLE hot runner
Mould size: 715*450*526mm
Cycle time: 15 s/stroke
Ejection: ejector and stripper set
Mould life: 5M
Mould base::45#,P20 made in China 
Mould core and cavity steel :Stavax S420 stainless,HRC45-52


If you need more oil cap mould information, welcome contact me.

Posted by: Snow
export3@cnmould.cn   export9@dakumar.cn
Skype:sinogroupe-71